Description
Estimated delivery time is 1-2 weeks.
The SunStar Commercial Angled Mount Gas Patio Heater delivers high-output radiant heat for large patios, commercial terraces, and outdoor dining spaces that require targeted heat direction. Available in 34,000 or 50,000 BTU configurations, this two-stage gas heater mounts at adjustable angles from 15 to 60 degrees, allowing heat to be directed precisely into seating zones while keeping the unit tight to the ceiling structure. The glass front face maintains a clean, modern appearance, while the 48-inch body integrates cleanly along beams, fascias, and soffits. Designed for commercial durability, this heater provides consistent, even coverage for restaurants, resorts, dining areas, lounges, bars, and hospitality environments.
SunStar heaters are available with four wall control configurations so you can choose the setup that fits your space. The standard wall switch provides simple ON and OFF operation. The wall switch with remote adds handheld control for added convenience. The wall switch with built-in 60-minute timer is a recessed switch option with lumination. It offers LOW and HIGH heat settings with an automatic shutoff for applications that require timed use (available as the standalone switch or switch + remote).
All models share the same heating performance. Choose your heater based on fuel type and control preference:
- Fuel Type: Natural Gas ("N" models) or Propane ("L" models)
- Control Type: Wall switch only ("7" models) or wall switch plus wireless remote ("10" models)
- Finish: SGL black glass-front steel cabinet
Features
- Two-stage heat output with 34,000 BTU low and 50,000 BTU high settings
- Angled mounting bracket adjusts from 15° to 60° to direct heat toward seating areas
- Available in natural gas or liquid propane with direct-spark ignition and automatic re-light
- Commercial-performance SGL50 black powder-coated steel cabinet
- Control options include a 3-position wall switch or wall switch plus wireless handheld remote
- Recommended mounting heights from 8 to 11 feet for angled installations, with coverage roughly 11' x 11' on low and up to 13' x 13' on high, depending on conditions
- Wind resistant up to 40 mph when installed to manufacturer clearances
- Outdoor-rated and CSA design certified for residential and commercial use
- Made in the USA
Specs
HEATER SIZING GUIDELINES - EXCERPT FROM MANUAL
These commercial heaters are designed for outdoor patio spaces, restaurant terraces, and large covered areas. Always follow the installation manual for gas line sizing, electrical requirements, mounting heights, and clearances to combustibles.
TYPICAL CLEARANCES TO COMBUSTIBLES – ANGELD MOUNT (SGL50 GLASS SERIES)
The table below shows typical minimum clearances for SGL50 glass series heaters. Installers must always confirm with the latest SunStar® installation instructions and local codes.
| MOUNTING ANGLE | CEILING | CEILING W/SHIELD* | BACK | SIDE | END | BELOW | FRONT |
| 30° | 23 in | 14 in | 8 in | 24 in | 12 in | 40 in | 48 in |
| 60° | 24 in | 17 in | 12 in | 24 in | 12 in | 40 in | 48 in |
*Values with shield apply when an optional clearance shield is installed. Indoor installations require different clearances; see the SunStar® installation manual for details.
SPECIFICATIONS
| Brand | SunStar® |
| Series | SGL50 Black Glass Series |
| Model Numbers |
50N7 SGL1560, 50N10 SGL1560, 50L7 SGL1560, 50L10 SGL1560
For Spec Sheet Model Clarification: |
| Fuel Type | Natural gas or liquid propane |
| BTU Output | 34,000 BTU (low) / 50,000 BTU (high), two-stage |
| Mounting | Adjustable 15° to 60° angled installation |
| Recommended Mounting Height | Approx. 8 to 11 ft for typical outdoor installations |
| Coverage Area | Approx. 11 ft x 11 ft (low) to 13 ft x 13 ft (high), depending on conditions |
| Ignition | Direct spark ignition with auto re-light |
| Cabinet Construction | High-temp black aluminized steel (SGL) |
| Dimensions | 9.5 in H x 11.5 in W x 48 in L |
| Electrical | 120 VAC, 60 Hz (controls and ignition) |
| Wind Resistance | Tested to 40 mph wind when installed to specified clearances |
| Certifications | CSA design certified (Z83.19 / Z83.26) |
| Warranty | 3 year limited warranty on burner assembly and 1 year limited warranty on controls |
| Country of Origin | Made in USA |
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Delivery
Ships in 1-2 weeks. Curbside freight delivery only. Customer is responsible for unloading and placement. See full Shipping Policy for details.
Returns Policy
Returns are accepted within 30 days from the date of purchase if eligible or defective. See full Return Policy for details.